UPSC Prelims 2026 · CSAT (Paper II): A cut on a solid object divides the object into two parts where the…
A cut on a solid object divides the object into two parts where the new surfaces thus produced are plane. On the other hand, one single cut can be used to cut more than one object at a time. In an experiment, the total number of pieces produced by applying n cuts is denoted by xₙ. The experiment is performed on a solid cube where pieces remain unmoved after each cut. In this experiment, if after the third cut, the pieces are identical, then which of the following is not a possible value for x₄?
Answer (a) & explanation
16 is not possible (a). Step 1: three plane cuts that leave identical pieces can give 4 slabs (all parallel), 6 equal pieces (two parallel plus one across), or 8 small cubes (one in each direction). Step 2: a fourth cut can add at most one piece for each piece it passes through. From 4 slabs: 5 to 8 pieces. From 6 pieces: up to 12. From 8 cubes: a single plane can pass through at most 7 of the 8 small cubes, so at most 15. Step 3: so 5, 8 and 12 are possible, but 16 would need the cut to split all 8 cubes, which no plane can do. Options (b), (c) and (d) are possible values.
Tip: a plane can never cut all 8 octants of a cube at once; it misses at least one.
Answer as per the official UPSC answer key.
Same theme in UPSC Mains
- MAINS UPSC Mains 2024 · GS Paper II · Q11What are the aims and objects of recently passed and enforced, The Public Examination (Prevention of Unfair Means) Act, 2024? Whether University/State Education Board examinations, too,…
- MAINS UPSC Mains 2023 · GS Paper III · Q4State the objectives and measures of land reforms in India. Discuss how land ceiling policy on landholding can be considered as an effective reform under economic…
Related questions from other years
Read the passage
How is deflation done? Most countries use a method called ‘double deflation’, where input and output prices are deflated separately. Consider a manufacturer importing oil for use in production. If oil prices fall, output prices do not and quantities remain the same, real value added should not change. But if the same deflator is used for inputs and outputs, as in India, it would look as if the manufacturer had become more productive.
Which of the following statements is/are correct?
- 1. Real value should not change in the instance of static output cost and unchanged quantities against falling oil prices.
- 2. Deflators are to be used separately for inputs and outputs, and this is a practice universally adopted by all economies.
Select the answer using the code given below.
Answer (d) & explanation
Neither statement is correct (d). Step 1: the passage says if oil prices fall while output prices and quantities stay the same, real value added should not change. Statement 1 changes this to "real value" and "static output cost", which distorts the idea. So 1 is not correct as worded. Step 2: statement 2 says separate deflators are used "universally" by all economies. But the passage says India uses the same deflator for both. So 2 is false. Step 3: options (a), (b) and (c) fail.
Tip: in economic passages, exact terms matter: "value added" is not "value", and "price" is not "cost". "Universally" is disproved by a single exception, here India.
Answer as per the official UPSC answer key.
P, Q, R, S and T are ranked 1 to 5 (not necessarily in that order). The rank of P is 4, the rank of Q is not 5, the rank of R is 1, the rank of S is not 2, the rank of T is not 3. Then which of the following is/are correct?
- I. If the rank of S is 3, then that of T is 2.
- II. If the rank of Q is 3, then that of T is 5.
Select the answer using the code given below.
Answer (d) & explanation
Neither statement is correct (d). Step 1: P = 4 and R = 1 are fixed. Ranks 2, 3 and 5 remain for Q, S and T, with rules: Q is not 5, S is not 2, T is not 3. Step 2: statement I: if S = 3, then Q and T share 2 and 5. Q cannot be 5, so Q = 2 and T = 5, not 2. I is wrong. Step 3: statement II: if Q = 3, then S and T share 2 and 5. S cannot be 2, so S = 5 and T = 2, not 5. II is wrong. Options (a), (b) and (c) fail.
Tip: fix the known ranks first, then apply each "if" condition and let the "not" rules decide the rest. Write the small table on paper.
Answer as per the official UPSC answer key.
How many times does 5 appear in all two-digit positive integers?
Answer (b) & explanation
The digit 5 appears 19 times (b). Step 1: 5 in the tens place: 50, 51, …, 59 = 10 times. Step 2: 5 in the units place: 15, 25, 35, 45, 55, 65, 75, 85, 95 = 9 times (05 is not a two-digit number). Step 3: total = 10 + 9 = 19. The number 55 has two 5s, and both are counted. Option (a), 18, counts 55 once. Options (c) and (d) wrongly add 05 or 5.
Tip: count place by place. The question asks how many times the digit appears, not how many numbers contain it (that would be 18).
Answer as per the official UPSC answer key.
An alloy P contains 20% copper and 80% zinc by weight. Another alloy Q contains 60% copper and 40% zinc by weight. A third alloy R is to be prepared from P and Q so that it contains equal amount of copper and zinc. In what ratio, amounts of P and Q be mixed in order to get R?
Answer (a) & explanation
P and Q must be mixed in the ratio 1 : 3 (a). Step 1: "equal copper and zinc" means R is 50% copper. Step 2: use alligation on copper: P has 20%, Q has 60%, and the mix needs 50%. P : Q = (60 − 50) : (50 − 20) = 10 : 30. Step 3: simplify to 1 : 3. Check: 1 kg P gives 0.2 kg copper; 3 kg Q gives 1.8 kg; total 2 kg copper in 4 kg = 50% ✓. Option (b) reverses the ratio. Options (c) and (d) fail.
Tip: in alligation, the amount of each item is the distance of the other item from the mean. Always check with a quick calculation.
Answer as per the official UPSC answer key.