UPSC Prelims 2011 · CSAT (Paper II): With reference to the passage, consider the following statements :1. It is imperative to…

UPSC Prelims 2011 · CSAT (Paper II)
Read the passage

Ecosystems provide people with a variety of goods and services; food, clean water, clean air, flood control, soil stabilization, pollination, climate regulation, spiritual fulfilment and aesthetic enjoyment, to name just a few. Most of these benefits either are irreplaceable or the technology necessary to replace them is prohibitively expensive. For example, potable fresh water can be provided by desalinating sea-water, but only at great cost.
The rapidly expanding human population has greatly modified the Earth’s ecosystems to meet their increased requirements of some of the goods and services, particularly food, fresh water, timber, fibre and fuel. These modifications have contributed substantially to human well being and economic development. The benefits have not been equally distributed. Some people have actually been harmed by these changes. Moreover, short-term increases in some ecosystem goods and services have come at the cost of the long-term degradation of others. For example, efforts to increase the production of food and fibre have decreased the ability of some ecosystems to provide clean water, regulate flooding and support biodiversity.

With reference to the passage, consider the following statements :

  • 1. It is imperative to modify the Earth’s ecosystems for the well being of mankind.
  • 2. Technology can never replace all the goods and services provided by ecosystems.

Which of the statements given above is/are correct ?

Answer (d) & explanation

Neither statement is correct (d). Step 1: statement 1 says it is imperative to modify ecosystems. The passage only records that modifications happened and helped development; it never says they are necessary, and it stresses the harm. So 1 is wrong. Step 2: statement 2 says technology can never replace ecosystem services. The passage says most are irreplaceable or the technology is 'prohibitively expensive', and gives desalination as a costly but working replacement. So 'never' overstates it. Step 3: options (a), (b) and (c) fail.

Tip: strong words like 'imperative', 'never' and 'always' are red flags. Check whether the passage is that absolute.

Answer as per the official UPSC answer key.

Same theme in UPSC Mains

Related questions from other years

UPSC Prelims 2026 · CSAT (Paper II)

Question : X receives three coins of different denominations : 1, 2, 5, 10 and 20. If the total amount received by X is m, does X receive a coin of denomination 5?

Statement I : m is not a prime number.

Statement II : The sum of the digits of m is greater than 5.

Answer (a) & explanation

Statement II alone is enough; Statement I alone is not (a). Step 1: three different coins from 1, 2, 5, 10, 20 give ten totals. With a 5: 8, 16, 17, 26, 27, 35. Without a 5: 13, 23, 31, 32. Step 2: Statement I (m not prime): 8, 16, 26, 27, 35 have a 5, but 32 (2 + 10 + 20) does not. Mixed answers, so I fails. Step 3: Statement II (digit sum above 5): 8, 16, 17, 26, 27, 35 qualify, and every one has a 5. (13, 23, 31, 32 have digit sums 4, 5, 4, 5.) So II answers "yes". Options (b), (c) and (d) fail.

Tip: when cases are few, list them all. Then check each statement against the full list.

Trap

don't assume both statements are needed. Listing all ten cases takes thirty seconds and settles it.

Answer as per the official UPSC answer key.

Open this question's page →

UPSC Prelims 2026 · CSAT (Paper II)
Read the passage

How is deflation done? Most countries use a method called ‘double deflation’, where input and output prices are deflated separately. Consider a manufacturer importing oil for use in production. If oil prices fall, output prices do not and quantities remain the same, real value added should not change. But if the same deflator is used for inputs and outputs, as in India, it would look as if the manufacturer had become more productive.

Which of the following assumptions is/are valid?

  • 1. Deflation strategies can be used to make manufacturers appear to be doing better than they actually are.
  • 2. When input and output prices are both deflated against a single input price, it is referred to as ‘double deflation’.

Select the answer using the code given below.

Answer (a) & explanation

Only assumption 1 is valid (a). Step 1: the passage says that using one deflator for inputs and outputs, as in India, makes it "look as if the manufacturer had become more productive". So deflation methods can make firms appear better than they are (1). Step 2: assumption 2 says double deflation means deflating both against a single price. But the passage defines double deflation as deflating inputs and outputs separately. So 2 reverses the definition. Step 3: options (b), (c) and (d) fail.

Tip: check definitions word for word against the passage. Deflating means removing the effect of price changes to find real growth, as in real GDP.

Answer as per the official UPSC answer key.

Open this question's page →

UPSC Prelims 2026 · CSAT (Paper II)

P, Q, R, S and T are ranked 1 to 5 (not necessarily in that order). The rank of P is 4, the rank of Q is not 5, the rank of R is 1, the rank of S is not 2, the rank of T is not 3. Then which of the following is/are correct?

  • I. If the rank of S is 3, then that of T is 2.
  • II. If the rank of Q is 3, then that of T is 5.

Select the answer using the code given below.

Answer (d) & explanation

Neither statement is correct (d). Step 1: P = 4 and R = 1 are fixed. Ranks 2, 3 and 5 remain for Q, S and T, with rules: Q is not 5, S is not 2, T is not 3. Step 2: statement I: if S = 3, then Q and T share 2 and 5. Q cannot be 5, so Q = 2 and T = 5, not 2. I is wrong. Step 3: statement II: if Q = 3, then S and T share 2 and 5. S cannot be 2, so S = 5 and T = 2, not 5. II is wrong. Options (a), (b) and (c) fail.

Tip: fix the known ranks first, then apply each "if" condition and let the "not" rules decide the rest. Write the small table on paper.

Answer as per the official UPSC answer key.

Open this question's page →

UPSC Prelims 2026 · CSAT (Paper II)

How many times does 5 appear in all two-digit positive integers?

Answer (b) & explanation

The digit 5 appears 19 times (b). Step 1: 5 in the tens place: 50, 51, …, 59 = 10 times. Step 2: 5 in the units place: 15, 25, 35, 45, 55, 65, 75, 85, 95 = 9 times (05 is not a two-digit number). Step 3: total = 10 + 9 = 19. The number 55 has two 5s, and both are counted. Option (a), 18, counts 55 once. Options (c) and (d) wrongly add 05 or 5.

Tip: count place by place. The question asks how many times the digit appears, not how many numbers contain it (that would be 18).

Answer as per the official UPSC answer key.

Open this question's page →