UPSC Prelims 2026 · CSAT (Paper II): Question : X receives three coins of different denominations : 1, 2, 5, 10…
Question : X receives three coins of different denominations : 1, 2, 5, 10 and 20. If the total amount received by X is m, does X receive a coin of denomination 5?
Statement I : m is not a prime number.
Statement II : The sum of the digits of m is greater than 5.
Answer (a) & explanation
Statement II alone is enough; Statement I alone is not (a). Step 1: three different coins from 1, 2, 5, 10, 20 give ten totals. With a 5: 8, 16, 17, 26, 27, 35. Without a 5: 13, 23, 31, 32. Step 2: Statement I (m not prime): 8, 16, 26, 27, 35 have a 5, but 32 (2 + 10 + 20) does not. Mixed answers, so I fails. Step 3: Statement II (digit sum above 5): 8, 16, 17, 26, 27, 35 qualify, and every one has a 5. (13, 23, 31, 32 have digit sums 4, 5, 4, 5.) So II answers "yes". Options (b), (c) and (d) fail.
Tip: when cases are few, list them all. Then check each statement against the full list.
don't assume both statements are needed. Listing all ten cases takes thirty seconds and settles it.
Answer as per the official UPSC answer key.
Same theme in UPSC Mains
- MAINS UPSC Mains 2026 · Essay · Q6A well-educated mind will always have more questions than answers.
- MAINS UPSC Mains 2026 · GS Paper III · Q14Discuss the different types of subsidies and supports provided by the Government of India to agricultural sector. Examine the related issues pertaining to Agreement on Agriculture…
- MAINS UPSC Mains 2023 · GS Paper IV · Q4bDifferentiate ‘moral intuition’ from ‘moral reasoning’ with suitable examples.
Related questions from other years
Read the passage
How is deflation done? Most countries use a method called ‘double deflation’, where input and output prices are deflated separately. Consider a manufacturer importing oil for use in production. If oil prices fall, output prices do not and quantities remain the same, real value added should not change. But if the same deflator is used for inputs and outputs, as in India, it would look as if the manufacturer had become more productive.
Which of the following assumptions is/are valid?
- 1. Deflation strategies can be used to make manufacturers appear to be doing better than they actually are.
- 2. When input and output prices are both deflated against a single input price, it is referred to as ‘double deflation’.
Select the answer using the code given below.
Answer (a) & explanation
Only assumption 1 is valid (a). Step 1: the passage says that using one deflator for inputs and outputs, as in India, makes it "look as if the manufacturer had become more productive". So deflation methods can make firms appear better than they are (1). Step 2: assumption 2 says double deflation means deflating both against a single price. But the passage defines double deflation as deflating inputs and outputs separately. So 2 reverses the definition. Step 3: options (b), (c) and (d) fail.
Tip: check definitions word for word against the passage. Deflating means removing the effect of price changes to find real growth, as in real GDP.
Answer as per the official UPSC answer key.
P, Q, R, S and T are ranked 1 to 5 (not necessarily in that order). The rank of P is 4, the rank of Q is not 5, the rank of R is 1, the rank of S is not 2, the rank of T is not 3. Then which of the following is/are correct?
- I. If the rank of S is 3, then that of T is 2.
- II. If the rank of Q is 3, then that of T is 5.
Select the answer using the code given below.
Answer (d) & explanation
Neither statement is correct (d). Step 1: P = 4 and R = 1 are fixed. Ranks 2, 3 and 5 remain for Q, S and T, with rules: Q is not 5, S is not 2, T is not 3. Step 2: statement I: if S = 3, then Q and T share 2 and 5. Q cannot be 5, so Q = 2 and T = 5, not 2. I is wrong. Step 3: statement II: if Q = 3, then S and T share 2 and 5. S cannot be 2, so S = 5 and T = 2, not 5. II is wrong. Options (a), (b) and (c) fail.
Tip: fix the known ranks first, then apply each "if" condition and let the "not" rules decide the rest. Write the small table on paper.
Answer as per the official UPSC answer key.
How many times does 5 appear in all two-digit positive integers?
Answer (b) & explanation
The digit 5 appears 19 times (b). Step 1: 5 in the tens place: 50, 51, …, 59 = 10 times. Step 2: 5 in the units place: 15, 25, 35, 45, 55, 65, 75, 85, 95 = 9 times (05 is not a two-digit number). Step 3: total = 10 + 9 = 19. The number 55 has two 5s, and both are counted. Option (a), 18, counts 55 once. Options (c) and (d) wrongly add 05 or 5.
Tip: count place by place. The question asks how many times the digit appears, not how many numbers contain it (that would be 18).
Answer as per the official UPSC answer key.
An alloy P contains 20% copper and 80% zinc by weight. Another alloy Q contains 60% copper and 40% zinc by weight. A third alloy R is to be prepared from P and Q so that it contains equal amount of copper and zinc. In what ratio, amounts of P and Q be mixed in order to get R?
Answer (a) & explanation
P and Q must be mixed in the ratio 1 : 3 (a). Step 1: "equal copper and zinc" means R is 50% copper. Step 2: use alligation on copper: P has 20%, Q has 60%, and the mix needs 50%. P : Q = (60 − 50) : (50 − 20) = 10 : 30. Step 3: simplify to 1 : 3. Check: 1 kg P gives 0.2 kg copper; 3 kg Q gives 1.8 kg; total 2 kg copper in 4 kg = 50% ✓. Option (b) reverses the ratio. Options (c) and (d) fail.
Tip: in alligation, the amount of each item is the distance of the other item from the mean. Always check with a quick calculation.
Answer as per the official UPSC answer key.