UPSC Prelims 2022 · CSAT (Paper II): Based on the above passage, the following assumptions have been made :1. Poor countries…
Read the passage
In some places in the world, the productivity of staples such as rice and wheat has reached a plateau. Neither new strains nor fancy agrochemicals are raising the yields. Nor is there much unfarmed land left that is suitable to be brought under the plough. If global temperature continues to rise, some places will become unsuitable for farming. Application of technology can help overcome these problems. Agricultural technology is changing fast. Much of this change is brought about by affluent farmers in the West/Americas. Techniques developed in the West are being adapted in some places to make tropical crops more productive. Technology is of little use if it is not adapted. In the developing world, that applies as much to existing farming techniques as it does to the latest advances in genetic modification. Extending to the smallholders and subsistence farmers of Africa and Asia the best of today’s agricultural practices, in such simple matters as how much fertilizers to apply and when, would lead to a greatly increased availability of food for humanity. So would things like better roads and storage facilities, to allow for the carriage of surpluses to markets and reduce wastage.
Based on the above passage, the following assumptions have been made :
- 1. Poor countries need to bring about change in their existing farming techniques.
- 2. Developed countries have better infrastructure and they waste less food.
Which of the above assumptions is/are valid?
Answer (a) & explanation
Only assumption 1 is valid (a). Step 1: the passage says spreading "the best of today's agricultural practices" to smallholders in Africa and Asia would greatly increase food. This assumes poor countries must change their current farming methods (1). Step 2: it mentions roads and storage to cut wastage, but it never compares developed and poor countries on infrastructure or waste (2). Step 3: so options (b), (c) and (d) fail.
Tip: an assumption must be needed for the author's argument. A comparison the author never makes cannot be an assumption.
Answer as per the official UPSC answer key.
Related questions from other years
Question : X receives three coins of different denominations : 1, 2, 5, 10 and 20. If the total amount received by X is m, does X receive a coin of denomination 5?
Statement I : m is not a prime number.
Statement II : The sum of the digits of m is greater than 5.
Answer (a) & explanation
Statement II alone is enough; Statement I alone is not (a). Step 1: three different coins from 1, 2, 5, 10, 20 give ten totals. With a 5: 8, 16, 17, 26, 27, 35. Without a 5: 13, 23, 31, 32. Step 2: Statement I (m not prime): 8, 16, 26, 27, 35 have a 5, but 32 (2 + 10 + 20) does not. Mixed answers, so I fails. Step 3: Statement II (digit sum above 5): 8, 16, 17, 26, 27, 35 qualify, and every one has a 5. (13, 23, 31, 32 have digit sums 4, 5, 4, 5.) So II answers "yes". Options (b), (c) and (d) fail.
Tip: when cases are few, list them all. Then check each statement against the full list.
don't assume both statements are needed. Listing all ten cases takes thirty seconds and settles it.
Answer as per the official UPSC answer key.
Read the passage
How is deflation done? Most countries use a method called ‘double deflation’, where input and output prices are deflated separately. Consider a manufacturer importing oil for use in production. If oil prices fall, output prices do not and quantities remain the same, real value added should not change. But if the same deflator is used for inputs and outputs, as in India, it would look as if the manufacturer had become more productive.
Which of the following assumptions is/are valid?
- 1. Deflation strategies can be used to make manufacturers appear to be doing better than they actually are.
- 2. When input and output prices are both deflated against a single input price, it is referred to as ‘double deflation’.
Select the answer using the code given below.
Answer (a) & explanation
Only assumption 1 is valid (a). Step 1: the passage says that using one deflator for inputs and outputs, as in India, makes it "look as if the manufacturer had become more productive". So deflation methods can make firms appear better than they are (1). Step 2: assumption 2 says double deflation means deflating both against a single price. But the passage defines double deflation as deflating inputs and outputs separately. So 2 reverses the definition. Step 3: options (b), (c) and (d) fail.
Tip: check definitions word for word against the passage. Deflating means removing the effect of price changes to find real growth, as in real GDP.
Answer as per the official UPSC answer key.
P, Q, R, S and T are ranked 1 to 5 (not necessarily in that order). The rank of P is 4, the rank of Q is not 5, the rank of R is 1, the rank of S is not 2, the rank of T is not 3. Then which of the following is/are correct?
- I. If the rank of S is 3, then that of T is 2.
- II. If the rank of Q is 3, then that of T is 5.
Select the answer using the code given below.
Answer (d) & explanation
Neither statement is correct (d). Step 1: P = 4 and R = 1 are fixed. Ranks 2, 3 and 5 remain for Q, S and T, with rules: Q is not 5, S is not 2, T is not 3. Step 2: statement I: if S = 3, then Q and T share 2 and 5. Q cannot be 5, so Q = 2 and T = 5, not 2. I is wrong. Step 3: statement II: if Q = 3, then S and T share 2 and 5. S cannot be 2, so S = 5 and T = 2, not 5. II is wrong. Options (a), (b) and (c) fail.
Tip: fix the known ranks first, then apply each "if" condition and let the "not" rules decide the rest. Write the small table on paper.
Answer as per the official UPSC answer key.
How many times does 5 appear in all two-digit positive integers?
Answer (b) & explanation
The digit 5 appears 19 times (b). Step 1: 5 in the tens place: 50, 51, …, 59 = 10 times. Step 2: 5 in the units place: 15, 25, 35, 45, 55, 65, 75, 85, 95 = 9 times (05 is not a two-digit number). Step 3: total = 10 + 9 = 19. The number 55 has two 5s, and both are counted. Option (a), 18, counts 55 once. Options (c) and (d) wrongly add 05 or 5.
Tip: count place by place. The question asks how many times the digit appears, not how many numbers contain it (that would be 18).
Answer as per the official UPSC answer key.