UPSC Prelims 2017 · CSAT (Paper II): There are three pillars X, Y and Z of different heights. Three spiders A,…

UPSC Prelims 2017 · CSAT (Paper II)

There are three pillars X, Y and Z of different heights. Three spiders A, B and C start to climb on these pillars simultaneously. In one chance, A climbs on X by 6 cm but slips down 1 cm. B climbs on Y by 7 cm but slips down 3 cm. C climbs on Z by 6·5 cm but slips down 2 cm. If each of them requires 40 chances to reach the top of the pillars, what is the height of the shortest pillar?

Answer (b) & explanation

The shortest pillar is 163 cm (b). Step 1: in the last chance, each spider reaches the top and does not slip. So height = 39 × (net gain per chance) + one full climb. Step 2: A on X gains 6 − 1 = 5 per chance: 39 × 5 + 6 = 201 cm. B on Y gains 7 − 3 = 4: 39 × 4 + 7 = 163 cm. C on Z gains 6.5 − 2 = 4.5: 39 × 4.5 + 6.5 = 182 cm. Step 3: the shortest is 163 cm. Option (c), 182, is Z. Option (a), 161, and option (d), 210, are errors from counting slips in the 40th chance.

Tip: in climb-and-slip puzzles, the final climb has no slip. Count it separately.

Trap

40 × 4 = 160 forgets the last climb, which has no slip.

Answer as per the official UPSC answer key.

Same theme in UPSC Mains

Related questions from other years

UPSC Prelims 2026 · CSAT (Paper II)

Question : X receives three coins of different denominations : 1, 2, 5, 10 and 20. If the total amount received by X is m, does X receive a coin of denomination 5?

Statement I : m is not a prime number.

Statement II : The sum of the digits of m is greater than 5.

Answer (a) & explanation

Statement II alone is enough; Statement I alone is not (a). Step 1: three different coins from 1, 2, 5, 10, 20 give ten totals. With a 5: 8, 16, 17, 26, 27, 35. Without a 5: 13, 23, 31, 32. Step 2: Statement I (m not prime): 8, 16, 26, 27, 35 have a 5, but 32 (2 + 10 + 20) does not. Mixed answers, so I fails. Step 3: Statement II (digit sum above 5): 8, 16, 17, 26, 27, 35 qualify, and every one has a 5. (13, 23, 31, 32 have digit sums 4, 5, 4, 5.) So II answers "yes". Options (b), (c) and (d) fail.

Tip: when cases are few, list them all. Then check each statement against the full list.

Trap

don't assume both statements are needed. Listing all ten cases takes thirty seconds and settles it.

Answer as per the official UPSC answer key.

Open this question's page →

UPSC Prelims 2026 · CSAT (Paper II)
Read the passage

How is deflation done? Most countries use a method called ‘double deflation’, where input and output prices are deflated separately. Consider a manufacturer importing oil for use in production. If oil prices fall, output prices do not and quantities remain the same, real value added should not change. But if the same deflator is used for inputs and outputs, as in India, it would look as if the manufacturer had become more productive.

Which of the following assumptions is/are valid?

  • 1. Deflation strategies can be used to make manufacturers appear to be doing better than they actually are.
  • 2. When input and output prices are both deflated against a single input price, it is referred to as ‘double deflation’.

Select the answer using the code given below.

Answer (a) & explanation

Only assumption 1 is valid (a). Step 1: the passage says that using one deflator for inputs and outputs, as in India, makes it "look as if the manufacturer had become more productive". So deflation methods can make firms appear better than they are (1). Step 2: assumption 2 says double deflation means deflating both against a single price. But the passage defines double deflation as deflating inputs and outputs separately. So 2 reverses the definition. Step 3: options (b), (c) and (d) fail.

Tip: check definitions word for word against the passage. Deflating means removing the effect of price changes to find real growth, as in real GDP.

Answer as per the official UPSC answer key.

Open this question's page →

UPSC Prelims 2026 · CSAT (Paper II)

P, Q, R, S and T are ranked 1 to 5 (not necessarily in that order). The rank of P is 4, the rank of Q is not 5, the rank of R is 1, the rank of S is not 2, the rank of T is not 3. Then which of the following is/are correct?

  • I. If the rank of S is 3, then that of T is 2.
  • II. If the rank of Q is 3, then that of T is 5.

Select the answer using the code given below.

Answer (d) & explanation

Neither statement is correct (d). Step 1: P = 4 and R = 1 are fixed. Ranks 2, 3 and 5 remain for Q, S and T, with rules: Q is not 5, S is not 2, T is not 3. Step 2: statement I: if S = 3, then Q and T share 2 and 5. Q cannot be 5, so Q = 2 and T = 5, not 2. I is wrong. Step 3: statement II: if Q = 3, then S and T share 2 and 5. S cannot be 2, so S = 5 and T = 2, not 5. II is wrong. Options (a), (b) and (c) fail.

Tip: fix the known ranks first, then apply each "if" condition and let the "not" rules decide the rest. Write the small table on paper.

Answer as per the official UPSC answer key.

Open this question's page →

UPSC Prelims 2026 · CSAT (Paper II)

How many times does 5 appear in all two-digit positive integers?

Answer (b) & explanation

The digit 5 appears 19 times (b). Step 1: 5 in the tens place: 50, 51, …, 59 = 10 times. Step 2: 5 in the units place: 15, 25, 35, 45, 55, 65, 75, 85, 95 = 9 times (05 is not a two-digit number). Step 3: total = 10 + 9 = 19. The number 55 has two 5s, and both are counted. Option (a), 18, counts 55 once. Options (c) and (d) wrongly add 05 or 5.

Tip: count place by place. The question asks how many times the digit appears, not how many numbers contain it (that would be 18).

Answer as per the official UPSC answer key.

Open this question's page →