UPSC Prelims 2014 · CSAT (Paper II): With reference to the passage, the following assumptions have been made :1. To maintain…
Read the passage
The Himalayan ecosystem is highly vulnerable to damage, both due to geological reasons and on account of the stress caused by increased pressure of population, exploitation of natural resources and other related challenges. These aspects may be exacerbated due to the impact of climate change. It is possible that climate change may adversely impact the Himalayan ecosystem through increased temperature, altered precipitation patterns, episodes of drought and biotic influences. This would not only impact the very sustenance of the indigenous communities in uplands but also the life of downstream dwellers across the country and beyond. Therefore, there is an urgent need for giving special attention to sustain the Himalayan ecosystem. This would require conscious efforts for conserving all the representative systems.
Further, it needs to be emphasized that the endemics with restricted distribution, and most often with specialized habitat requirements, are among the most vulnerable elements. In this respect the Himalayan biodiversity hotspot, with rich endemic diversity, is vulnerable to climate change. The threats include possible loss of genetic resources and species, habitats and concomitantly a decrease in ecosystem services. Therefore, conservation of endemic elements in representative ecosystems/habitats assumes a great significance while drawing conservation plans for the region.
Towards achieving the above, we will have to shift toward contemporary conservation approaches, which include a paradigm of landscape level interconnectivity between protected area systems. The concept advocates a shift from the species-habitat focus to an inclusive focus on expanding the biogeographic range so that natural adjustments to climate change can proceed without being restrictive.
With reference to the passage, the following assumptions have been made :
- 1. To maintain natural ecosystems, exploitation of natural resources should be completely avoided.
- 2. Not only anthropogenic but also natural reasons can adversely affect ecosystems.
- 3. Loss of endemic diversity leads to the extinction of ecosystems.
Which of the above assumptions is/are correct ?
Answer (b) & explanation
Only assumption 2 is valid (b). Step 1: test assumption 2. The passage says the Himalaya is vulnerable "both due to geological reasons and on account of the stress" from people. So both natural and human causes can harm ecosystems. 2 holds. Step 2: test assumption 1. The passage never says exploitation must be "completely avoided". That extreme word makes 1 wrong. Step 3: test assumption 3. Losing endemic species reduces ecosystem services; the passage never says ecosystems go extinct. So 3 is wrong. Options (a), (c) and (d) fail.
Tip: words like "completely", "always" and "never" make an assumption too strong unless the passage itself uses them.
Answer as per the official UPSC answer key.
Same theme in UPSC Mains
Related questions from other years
Question : X receives three coins of different denominations : 1, 2, 5, 10 and 20. If the total amount received by X is m, does X receive a coin of denomination 5?
Statement I : m is not a prime number.
Statement II : The sum of the digits of m is greater than 5.
Answer (a) & explanation
Statement II alone is enough; Statement I alone is not (a). Step 1: three different coins from 1, 2, 5, 10, 20 give ten totals. With a 5: 8, 16, 17, 26, 27, 35. Without a 5: 13, 23, 31, 32. Step 2: Statement I (m not prime): 8, 16, 26, 27, 35 have a 5, but 32 (2 + 10 + 20) does not. Mixed answers, so I fails. Step 3: Statement II (digit sum above 5): 8, 16, 17, 26, 27, 35 qualify, and every one has a 5. (13, 23, 31, 32 have digit sums 4, 5, 4, 5.) So II answers "yes". Options (b), (c) and (d) fail.
Tip: when cases are few, list them all. Then check each statement against the full list.
don't assume both statements are needed. Listing all ten cases takes thirty seconds and settles it.
Answer as per the official UPSC answer key.
Read the passage
How is deflation done? Most countries use a method called ‘double deflation’, where input and output prices are deflated separately. Consider a manufacturer importing oil for use in production. If oil prices fall, output prices do not and quantities remain the same, real value added should not change. But if the same deflator is used for inputs and outputs, as in India, it would look as if the manufacturer had become more productive.
Which of the following assumptions is/are valid?
- 1. Deflation strategies can be used to make manufacturers appear to be doing better than they actually are.
- 2. When input and output prices are both deflated against a single input price, it is referred to as ‘double deflation’.
Select the answer using the code given below.
Answer (a) & explanation
Only assumption 1 is valid (a). Step 1: the passage says that using one deflator for inputs and outputs, as in India, makes it "look as if the manufacturer had become more productive". So deflation methods can make firms appear better than they are (1). Step 2: assumption 2 says double deflation means deflating both against a single price. But the passage defines double deflation as deflating inputs and outputs separately. So 2 reverses the definition. Step 3: options (b), (c) and (d) fail.
Tip: check definitions word for word against the passage. Deflating means removing the effect of price changes to find real growth, as in real GDP.
Answer as per the official UPSC answer key.
P, Q, R, S and T are ranked 1 to 5 (not necessarily in that order). The rank of P is 4, the rank of Q is not 5, the rank of R is 1, the rank of S is not 2, the rank of T is not 3. Then which of the following is/are correct?
- I. If the rank of S is 3, then that of T is 2.
- II. If the rank of Q is 3, then that of T is 5.
Select the answer using the code given below.
Answer (d) & explanation
Neither statement is correct (d). Step 1: P = 4 and R = 1 are fixed. Ranks 2, 3 and 5 remain for Q, S and T, with rules: Q is not 5, S is not 2, T is not 3. Step 2: statement I: if S = 3, then Q and T share 2 and 5. Q cannot be 5, so Q = 2 and T = 5, not 2. I is wrong. Step 3: statement II: if Q = 3, then S and T share 2 and 5. S cannot be 2, so S = 5 and T = 2, not 5. II is wrong. Options (a), (b) and (c) fail.
Tip: fix the known ranks first, then apply each "if" condition and let the "not" rules decide the rest. Write the small table on paper.
Answer as per the official UPSC answer key.
How many times does 5 appear in all two-digit positive integers?
Answer (b) & explanation
The digit 5 appears 19 times (b). Step 1: 5 in the tens place: 50, 51, …, 59 = 10 times. Step 2: 5 in the units place: 15, 25, 35, 45, 55, 65, 75, 85, 95 = 9 times (05 is not a two-digit number). Step 3: total = 10 + 9 = 19. The number 55 has two 5s, and both are counted. Option (a), 18, counts 55 once. Options (c) and (d) wrongly add 05 or 5.
Tip: count place by place. The question asks how many times the digit appears, not how many numbers contain it (that would be 18).
Answer as per the official UPSC answer key.